Phoenix™ 713-A Sub-Aqueous Type High Performance Pipe Joint Lubricant
Phoenix 713A is a soft, non-water dispersible paste. It is a stable blend of vegetable oils, soaps, surfactants, clays and water. Mating of abutting pipes forces the gel into the cavity, thus providing the needed lubrication to complete the coupling and seal the joint. This soap and surfactant lubricant does not dry out when gaskets are stored.
Phoenix 713-A maintains its soft paste consistency and amber/tan color. It can be used from 10° to 110°F. It can be used on all types of pipe including asbestos cement, cast iron, concrete, plastic an clay pipe. It will not deteriorate natural rubber, synthetic rubber or plastic gaskets.
Phoenix 713-A is certified to meet ANSI/NSF Standard #61 requirements for use in potable water systems. JTM uses strict analytical standards and formulation consistency to assure consistent productino of a safe lubricant for water pipe joining needs.
Phoenix 713-A utilizes environmentally friendly raw materials common in the soap and lubricant industries. It will not irritate the hands and is not toxic. It can be cleaned using warm water with soap or detergent. It contains no petroleum oils or phosphates.
Effectively lubricates pipe and pipe gaskets for safe and efficient assembly of all types of pipe. Water insoluble formula is excellent for underwater pipe assembly, it will not wash off pipe or gaskets under the harshest of weather or job site conditions.
Certification provided by the Water Quality Association.
- Soft paste-like compound
- Meets ANSI/NSF Standard #61
- Contains no Petroleum
- Will not support bacteria
- Designed for applying in wet or dry conditions
- Will not swell gaskets
Form: Soft Paste
Bulk Density: Approximately 12 lb/gallon
Non Volatile Materials: Approximately 95%
Total Alkalinity: 10-30 mg KOH/g equivalent
Penetration: 300-350 1/10mm @ 77°F